why the Thrillseeker compressors complement each other so well

Audio compressors use either a “feed forward” or “feedback” design to control the gain of an audio signal. In a feed forward compressor, the input signal is used directly to control the gain of the output signal. Essentially, the compressor compares the input signal to a threshold and reduces the gain of the output signal if the input signal exceeds the threshold. In a feedback compressor, the output signal is fed back into the compressor and used to control the gain of the input signal. So, the compressor compares the output signal to a threshold and reduces the gain of the input signal if the output signal exceeds the threshold. Both feed forward and feedback compressors can be effective at controlling the dynamic range of an audio signal, but they operate in slightly different ways and do have different characteristics in terms of their sound and response.

However, the specific sound of a device depends largely on other features of the circuit design and its components. For example, an optoelectric compressor uses a photoresistor or photodiode to detect and control the degree of gain reduction of the signal. But the make-up amplifier afterwards may contribute the most to the sound, depending on its design (tube or solid state). A variable gain tube compressor, on the other hand, uses a vacuum tube to control the gain of the compressor. The vacuum tube is used to amplify the signal, and the gain of the compressor is controlled by changing the bias voltage of the tube. This alone provides a very typical, distinctive sound that is very rich in harmonic overtones.

Both opto-electrical and variable-mu tube compressors are commonly used in audio production to control the dynamic range of a signal, but they operate in different ways and can produce different tonal characteristics. Opto-electrical compressors are known for their fast attack times and smooth release characteristics, while variable-mu tube compressors are known for their warm and smooth sound.