mixing kick and bass w/o EQ

Featuring FerricTDS.

Thanks to Justin for sharing!

tips & tricks with ThrillseekerVBL

The Sweet Spot

The plug-in includes a preset called “LA Sweet-Spot” and one can safely use this setting on almost everything just to add a little more mojo. Just drive the unit with a proper “IN GAIN” amount so that the overall compression and distortion fits to the source.

Increased Stereo Imaging

If ThrillseekerVBL is used on stereo program material, I would recommend to use the TRAFO option to have the most prominent stereo imaging effects. Also, if there is just a little gain reduction amount applied, I would prefer the “DUAL M” option opposed to “STEREO” linking. And I would always use the “DUAL M” option on sources like vocal groups, panned rhythm guitars and stuff.

VBL as a Mastering EQ

One common mastering trick to open up a rather flat/dull track is to dial in a slight but broad 5kHz boost with an analog tube equalizer. Due to the tube circuit also higher order harmonics are generated and the whole stereo image opens up.

This can be replicated perfectly with ThrillseekerVBL: Move the “BRILLIANCE” screw to its top most position and set the “AMP” knob to 0.68. If distortion is too much now, just back it off by dialing in some compression and/or lowering the input gain.

If the EQ effect amount is too much, simply use the “DRY:WET” option. Also make sure that the trafo is in and prepare yourself for pure awesomeness.

Some Shorties

• Avoid pumping: Dial in some more “EMPHASIS”.
• More HF focus: Turn the “BIAS” screw clock-wise.
• Upward compression style: Dial in some dry signal amounts (just a little).

utilizing early reflections in a production

A quite often underestimated or even forgotten production technique is to take advantage of artificial early reflections which could be added somewhere during the mixing process. Without inserting any fully fledged reverberation at all, applying such techniques allows to dramatically increase stereo width and depth perception as well as a way better instrument localization even in a busy mix. Creating density is not the goal here but the opposite is the name of the game: achieving a clear and intelligible mix.

In a simple case, one can place a short and plain delay (a slap-back echo) on a track and properly place it in the stereo field – maybe on the opposite side of the source but that’s just an example. More sophisticated tap delays could be used to create a sort of room experience and some reverberators are allowing to disable the late reverb diffusion and just to use their early reflection generation. There are no restrictions in general – allowed is what gets the job done in that specific mixing situation.

ThrillseekerLA explained

What is needed to get clear from the start is that every compressor will sound different, the controls will act differently, and some will be better at doing certain types of compression than others. While the basic controls like ATTACK and RELEASE will have a similar function, the resulting change to the sound may be totally different.

David from www.learndigitalaudio.com has made a deep and comprehensive article about compression and ThrillseekerLA. Don’t miss to read the whole thing over there at his site which contains lots of examples and explanations. Theres also a PDF document available.

how a modern exciter/enhancer should look like

Well, that’s exactly what I would like to know from you! Is it just an ancient relict from the days of dull tape recordings or still a valid concept? Opposed to the old approaches of audio excitation: What should such a device offer for todays modern audio production? And what would separate it from the common tools like compressors, transient designers and equalizers? Is it needed for any specific production stage? Which one? What exactly needs to be “enhanced”? Does all the different distribution formats and listening environments play a role? Psycho Acoustics? Question upon question ….