FlavourMTC “Mixbus Tone Control” released

FlavourMTC follows classic “passive” equalizer designs where the EQ circuits itself are not able to amplify signals but a dedicated amplifier stage takes care of it. Those EQ designs are well known for allowing very transparent frequency changes while their amplifier designs do add some icing on the cake quite often.

mixbus tone control – closest to analog

FlavourMTC implements this by utilizing 1^st order shelving filter designs avoiding unwanted resonances and takes advantage of “zero delay” implementations for most accurate higher order filtering and w/o introducing curve warping near Nyquist frequency. The output amplifier stage of the plugin can be calibrated according specific mixing levels, provides a distinct “box tone” and glues everything together. Parts of the plugin are oversampled internally for maximum transparency and sound quality.

Available for Windows VST in 32 and 64bit as freeware. Download your copy here.

NastyDLA – final teaser and release info

NastyDLA – technical architecture

simplified technical architecture

Internally, NastyDLA consists of quite a bunch of DSP processing building blocks which as a whole are summing up to an authentic signal path simulation of it’s analog models. The blocks and the according signal flow are shown in the diagram above. Basic signal flow goes from left to right except the feedback path which goes in the opposite direction.

With NastyDLA, signal path coloration already starts in the input stage which provides a complete model of both, frequency and phase response as well as dynamic saturation. It’s located in the dry path but all nonlinear processing and coloring can be disabled on demand so it remains as a simple input volume control then. But while switched in, the input stage can greatly contribute on getting the processed signal to fit right into a mix.